Liquid Leak detection systems protect vulnerable areas where water leakage could seriously damage electrical, communication or computer networks.
It provides round the clock protection against water leakage via continuous monitoring and can be installed in a wide range of applications.
What we do:
We can complete all three stages of the liquid or water leak detection system process (supply, installation and maintenance) or individual stages as required.
Our range:
We are distributors for the Hydrosense liquid leak detection system which is comprised of 3 parts:
- Hydrowire (Water Detection Cable)
- Point Detection
- Hydrosense Control Panel
Hydrowire:
Hydrowire is best suited to areas such as floors, concealed floors, ducts and suspended ceilings. It is a flexible 4 core cable that is highly sensitive to water and available in 5M or 10M lengths (extendable in a daisy chain fashion up to 50M max)
The Hydrowire is connected via an interface control box which signals back to the panel when water presence is detected. An end of line plug is required to be installed at the end of the cable run allowing the panel to monitor for open/short circuit conditions. One Interface control box can connect to one panel zone therefore one run of cable is allowed per zone.
Point Detection:
The point detector probe is suited to areas of localised detection such as storage areas, lift shafts etc. Multiple (up to 20) detectors can connect to a zone with use of junction boxes. Each point detector has a green activation LED for easier location of the leak.
Contact our dedicated team today for a friendly no obligation quotation